Method Details

• getChartType

  public ChartType getChartType()

  Specified by:

  getChartType in class PointOptions

• getAllowPointSelect

  public Boolean getAllowPointSelect()

  Specified by:

  getAllowPointSelect in class PointOptions

  See Also:

  • setAllowPointSelect(Boolean)

• setAllowPointSelect

  public void setAllowPointSelect(Boolean allowPointSelect)

  Allow this series' points to be selected by clicking on the markers, bars or pie slices.

  Defaults to: false

  Specified by:

  setAllowPointSelect in class PointOptions

• getAnimation

  public Boolean getAnimation()

  Specified by:

  getAnimation in class PointOptions

  See Also:

  • setAnimation(Boolean)

• setAnimation

  public void setAnimation(Boolean animation)

  Enable or disable the initial animation when a series is displayed. Please note that this option only applies to the initial animation of the series itself. For other animations, see ChartModel.setAnimation(Boolean)

  Specified by:

  setAnimation in class PointOptions

• getAnimationLimit

  public Number getAnimationLimit()

  Specified by:

  getAnimationLimit in class PointOptions

  See Also:

  • setAnimationLimit(Number)

• setAnimationLimit

  public void setAnimationLimit(Number animationLimit)

  For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally. To disable this cap, set animationLimit to Infinity.

  Specified by:

  setAnimationLimit in class PointOptions

• getClassName

  public String getClassName()

  Specified by:

  getClassName in class PointOptions

  See Also:

  • setClassName(String)

• setClassName

  public void setClassName(String className)

  A class name to apply to the series' graphical elements.

  Specified by:

  setClassName in class PointOptions

• getClip

  public Boolean getClip()

  Specified by:

  getClip in class PointOptions

  See Also:

  • setClip(Boolean)

• setClip

  public void setClip(Boolean clip)

  Disable this option to allow series rendering in the whole plotting area. Note that lipping should be always enabled when chart.zoomType is set

  Defaults to false.

  Specified by:

  setClip in class PointOptions

• getColor

  public Color getColor()

  Specified by:

  getColor in class PointOptions

  See Also:

  • setColor(Color)

• setColor

  public void setColor(Color color)

  The main color or the series. In line type series it applies to the line and the point markers unless otherwise specified. In bar type series it applies to the bars unless a color is specified per point. The default value is pulled from the options.colors array.

  In styled mode, the color can be defined by the colorIndex option. Also, the series color can be set with the .highcharts-series, .highcharts-color-{n}, .highcharts-{type}-series or .highcharts-series-{n} class, or individual classes given by the className option.

  Specified by:

  setColor in class PointOptions

• getColorIndex

  public Number getColorIndex()

  Specified by:

  getColorIndex in class PointOptions

  See Also:

  • setColorIndex(Number)

• setColorIndex

  public void setColorIndex(Number colorIndex)

  Styled mode only. A specific color index to use for the series, so its graphic representations are given the class name highcharts-color-{n}.

  Specified by:

  setColorIndex in class PointOptions

• getColorKey

  public String getColorKey()

  Specified by:

  getColorKey in class PointOptions

  See Also:

  • setColorKey(String)

• setColorKey

  public void setColorKey(String colorKey)

  Determines what data value should be used to calculate point color if colorAxis is used. Requires to set min and max if some custom point property is used or if approximation for data grouping is set to 'sum'.

  Defaults to y.

  Specified by:

  setColorKey in class PointOptions

• getCrisp

  public Boolean getCrisp()

  Specified by:

  getCrisp in class PointOptions

  See Also:

  • setCrisp(Boolean)

• setCrisp

  public void setCrisp(Boolean crisp)

  When true, each point or column edge is rounded to its nearest pixel in order to render sharp on screen. In some cases, when there are a lot of densely packed columns, this leads to visible difference in column widths or distance between columns. In these cases, setting crisp to false may look better, even though each column is rendered blurry.

  Defaults to true.

  Specified by:

  setCrisp in class PointOptions

• getConnectEnds

  public Boolean getConnectEnds()

  See Also:

  • setConnectEnds(Boolean)

• setConnectEnds

  public void setConnectEnds(Boolean connectEnds)

  Polar charts only. Whether to connect the ends of a line series plot across the extremes.

  Defaults to: true

• getConnectNulls

  public Boolean getConnectNulls()

  See Also:

  • setConnectNulls(Boolean)

• setConnectNulls

  public void setConnectNulls(Boolean connectNulls)

  Whether to connect a graph line across null points.

  Defaults to: false

• getCropThreshold

  public Number getCropThreshold()

  Specified by:

  getCropThreshold in class PointOptions

  See Also:

  • setCropThreshold(Number)

• setCropThreshold

  public void setCropThreshold(Number cropThreshold)

  When the series contains less points than the crop threshold, all points are drawn, even if the points fall outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and columns), is that animation is performed on updates. On the other hand, when the series contains more points than the crop threshold, the series data is cropped to only contain points that fall within the plot area. The advantage of cropping away invisible points is to increase performance on large series.

  Defaults to: 300

  Specified by:

  setCropThreshold in class PointOptions

• getCursor

  public Cursor getCursor()

  Specified by:

  getCursor in class PointOptions

  See Also:

  • setCursor(Cursor)

• setCursor

  public void setCursor(Cursor cursor)

  You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

  Specified by:

  setCursor in class PointOptions

• getDashStyle

  public DashStyle getDashStyle()

  Specified by:

  getDashStyle in class PointOptions

  See Also:

  • setDashStyle(DashStyle)

• setDashStyle

  public void setDashStyle(DashStyle dashStyle)

  A name for the dash style to use for the graph. Applies only to series type having a graph, like line, spline, area and scatter in case it has a lineWidth. The value for the dashStyle include:

  • Solid
  • ShortDash
  • ShortDot
  • ShortDashDot
  • ShortDashDotDot
  • Dot
  • Dash
  • LongDash
  • DashDot
  • LongDashDot
  • LongDashDotDot

  Defaults to: Solid

  Specified by:

  setDashStyle in class PointOptions

• getDataLabels

  public DataLabels getDataLabels()

  Specified by:

  getDataLabels in class PointOptions

  See Also:

  • setDataLabels(DataLabels)

• setDataLabels

  public void setDataLabels(DataLabels dataLabels)

  Options for the series data labels, appearing next to each data point.

  In styled mode, the data labels can be styled wtih the .highcharts-data-label-box and .highcharts-data-label class names (see example).

  Specified by:

  setDataLabels in class PointOptions

• getDescription

  public String getDescription()

  Specified by:

  getDescription in class PointOptions

  See Also:

  • setDescription(String)

• setDescription

  public void setDescription(String description)

  Requires Accessibility module

  A description of the series to add to the screen reader information about the series.

  Defaults to: undefined

  Specified by:

  setDescription in class PointOptions

• getEnableMouseTracking

  public Boolean getEnableMouseTracking()

  Specified by:

  getEnableMouseTracking in class PointOptions

  See Also:

  • setEnableMouseTracking(Boolean)

• setEnableMouseTracking

  public void setEnableMouseTracking(Boolean enableMouseTracking)

  Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.

  Defaults to: true

  Specified by:

  setEnableMouseTracking in class PointOptions

• getExposeElementToA11y

  public Boolean getExposeElementToA11y()

  Specified by:

  getExposeElementToA11y in class PointOptions

  See Also:

  • setExposeElementToA11y(Boolean)

• setExposeElementToA11y

  public void setExposeElementToA11y(Boolean exposeElementToA11y)

  By default, series are exposed to screen readers as regions. By enabling this option, the series element itself will be exposed in the same way as the data points. This is useful if the series is not used as a grouping entity in the chart, but you still want to attach a description to the series.

  Requires the Accessibility module.

  Defaults to: undefined

  Specified by:

  setExposeElementToA11y in class PointOptions

• getFindNearestPointBy

  public Dimension getFindNearestPointBy()

  Specified by:

  getFindNearestPointBy in class PointOptions

  See Also:

  • setFindNearestPointBy(Dimension)

• setFindNearestPointBy

  public void setFindNearestPointBy(Dimension findNearestPointBy)

  Determines whether the series should look for the nearest point in both dimensions or just the x-dimension when hovering the series. Defaults to 'xy' for scatter series and 'x' for most other series. If the data has duplicate x-values, it is recommended to set this to 'xy' to allow hovering over all points.

  Applies only to series types using nearest neighbor search (not direct hover) for tooltip.

  Specified by:

  setFindNearestPointBy in class PointOptions

• getGetExtremesFromAll

  public Boolean getGetExtremesFromAll()

  Specified by:

  getGetExtremesFromAll in class PointOptions

  See Also:

  • setGetExtremesFromAll(Boolean)

• setGetExtremesFromAll

  public void setGetExtremesFromAll(Boolean getExtremesFromAll)

  Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.

  Defaults to: false

  Specified by:

  setGetExtremesFromAll in class PointOptions

• getKeys

  public String[] getKeys()

  Specified by:

  getKeys in class PointOptions

  See Also:

  • setKeys(String...)

• setKeys

  public void setKeys(String... keys)

  An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.

  Specified by:

  setKeys in class PointOptions

• addKey

  public void addKey(String key)

  Adds key to the keys array

  Specified by:

  addKey in class PointOptions

  Parameters:

  key - to add

  See Also:

  • setKeys(String...)

• removeKey

  public void removeKey(String key)

  Removes first occurrence of key in keys array

  Specified by:

  removeKey in class PointOptions

  Parameters:

  key - to remove

  See Also:

  • setKeys(String...)

• getLineWidth

  public Number getLineWidth()

  Specified by:

  getLineWidth in class PointOptions

  See Also:

  • setLineWidth(Number)

• setLineWidth

  public void setLineWidth(Number lineWidth)

  Pixel with of the graph line.

  Defaults to: 2

  Specified by:

  setLineWidth in class PointOptions

• getLinecap

  public String getLinecap()

  See Also:

  • setLinecap(String)

• setLinecap

  public void setLinecap(String linecap)

  The line cap used for line ends and line joins on the graph.

  Defaults to: round

• getLinkedTo

  public String getLinkedTo()

  Specified by:

  getLinkedTo in class PointOptions

  See Also:

  • setLinkedTo(String)

• setLinkedTo

  public void setLinkedTo(String linkedTo)

  The id of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.

  Specified by:

  setLinkedTo in class PointOptions

• getMarker

  public Marker getMarker()

  Specified by:

  getMarker in class PointOptions

  See Also:

  • setMarker(Marker)

• setMarker

  public void setMarker(Marker marker)

  Options for the point markers of line-like series. Properties like fillColor, lineColor and lineWidth define the visual appearance of the markers. Other series types, like column series, don't have markers, but have visual options on the series level instead.

  In styled mode, the markers can be styled with the .highcharts-point, .highcharts-point-hover and .highcharts-point-select class names.

  Specified by:

  setMarker in class PointOptions

• getNegativeColor

  public Color getNegativeColor()

  Specified by:

  getNegativeColor in class PointOptions

  See Also:

  • setNegativeColor(Color)

• setNegativeColor

  public void setNegativeColor(Color negativeColor)

  The color for the parts of the graph or points that are below the threshold.

  Defaults to: null

  Specified by:

  setNegativeColor in class PointOptions

• getOpacity

  public Number getOpacity()

  Specified by:

  getOpacity in class PointOptions

  See Also:

  • setOpacity(Number)

• setOpacity

  public void setOpacity(Number opacity)

  Opacity of a series parts: line, fill (e.g. area) and dataLabels.

  Defaults to 1.

  Specified by:

  setOpacity in class PointOptions

• getPointDescriptionFormatter

  public String getPointDescriptionFormatter()

  Specified by:

  getPointDescriptionFormatter in class PointOptions

• setPointDescriptionFormatter

  public void setPointDescriptionFormatter(String _fn_pointDescriptionFormatter)

  Specified by:

  setPointDescriptionFormatter in class PointOptions

• getPointInterval

  public Number getPointInterval()

  Specified by:

  getPointInterval in class PointOptions

  See Also:

  • setPointInterval(Number)

• setPointInterval

  public void setPointInterval(Number pointInterval)

  If no x values are given for the points in a series, pointInterval defines the interval of the x values. For example, if a series contains one value every decade starting from year 0, set pointInterval to 10.

  Since Highcharts 4.1, it can be combined with pointIntervalUnit to draw irregular intervals.

  Defaults to: 1

  Specified by:

  setPointInterval in class PointOptions

• getPointIntervalUnit

  public IntervalUnit getPointIntervalUnit()

  Specified by:

  getPointIntervalUnit in class PointOptions

  See Also:

  • setPointIntervalUnit(IntervalUnit)

• setPointIntervalUnit

  public void setPointIntervalUnit(IntervalUnit pointIntervalUnit)

  On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year. A day is usually the same as 24 hours, but pointIntervalUnit also takes the DST crossover into consideration when dealing with local time. Combine this option with pointInterval to draw weeks, quarters, 6 months, 10 years etc.

  Specified by:

  setPointIntervalUnit in class PointOptions

• getPointPlacement

  public PointPlacement getPointPlacement()

  Specified by:

  getPointPlacement in class PointOptions

  See Also:

  • setPointPlacement(PointPlacement)

• setPointPlacement

  public void setPointPlacement(PointPlacement pointPlacement)

  Possible values: null, "on", "between".

  In a column chart, when pointPlacement is "on", the point will not create any padding of the X axis. In a polar column chart this means that the first column points directly north. If the pointPlacement is "between", the columns will be laid out between ticks. This is useful for example for visualising an amount between two points in time or in a certain sector of a polar chart.

  Since Highcharts 3.0.2, the point placement can also be numeric, where 0 is on the axis value, -0.5 is between this value and the previous, and 0.5 is between this value and the next. Unlike the textual options, numeric point placement options won't affect axis padding.

  Note that pointPlacement needs a pointRange to work. For column series this is computed, but for line-type series it needs to be set.

  Defaults to null in cartesian charts, "between" in polar charts.

  Specified by:

  setPointPlacement in class PointOptions

• getPointStart

  public Number getPointStart()

  Specified by:

  getPointStart in class PointOptions

  See Also:

  • setPointStart(Number)

• setPointStart

  public void setPointStart(Number pointStart)

  If no x values are given for the points in a series, pointStart defines on what value to start. For example, if a series contains one yearly value starting from 1945, set pointStart to 1945.

  Defaults to: 0

  Specified by:

  setPointStart in class PointOptions

• getSelected

  public Boolean getSelected()

  Specified by:

  getSelected in class PointOptions

  See Also:

  • setSelected(Boolean)

• setSelected

  public void setSelected(Boolean selected)

  Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.

  Defaults to: false

  Specified by:

  setSelected in class PointOptions

• getShadow

  public Boolean getShadow()

  Specified by:

  getShadow in class PointOptions

  See Also:

  • setShadow(Boolean)

• setShadow

  public void setShadow(Boolean shadow)

  Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.

  Defaults to: false

  Specified by:

  setShadow in class PointOptions

• getShowCheckbox

  public Boolean getShowCheckbox()

  Specified by:

  getShowCheckbox in class PointOptions

  See Also:

  • setShowCheckbox(Boolean)

• setShowCheckbox

  public void setShowCheckbox(Boolean showCheckbox)

  If true, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox is determined by the selected option.

  Defaults to: false

  Specified by:

  setShowCheckbox in class PointOptions

• getShowInLegend

  public Boolean getShowInLegend()

  Specified by:

  getShowInLegend in class PointOptions

  See Also:

  • setShowInLegend(Boolean)

• setShowInLegend

  public void setShowInLegend(Boolean showInLegend)

  Whether to display this particular series or series type in the legend. The default value is true for standalone series, false for linked series.

  Defaults to: true

  Specified by:

  setShowInLegend in class PointOptions

• getSkipKeyboardNavigation

  public Boolean getSkipKeyboardNavigation()

  Specified by:

  getSkipKeyboardNavigation in class PointOptions

  See Also:

  • setSkipKeyboardNavigation(Boolean)

• setSkipKeyboardNavigation

  public void setSkipKeyboardNavigation(Boolean skipKeyboardNavigation)

  If set to True, the accessibility module will skip past the points in this series for keyboard navigation.

  Specified by:

  setSkipKeyboardNavigation in class PointOptions

• getSoftThreshold

  public Boolean getSoftThreshold()

  Specified by:

  getSoftThreshold in class PointOptions

  See Also:

  • setSoftThreshold(Boolean)

• setSoftThreshold

  public void setSoftThreshold(Boolean softThreshold)

  When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the data actually crosses the plane.

  For example, if softThreshold is false, a series of 0, 1, 2, 3 will make the Y axis show negative values according to the minPadding option. If softThreshold is true, the Y axis starts at 0.

  Defaults to: true

  Specified by:

  setSoftThreshold in class PointOptions

• getStacking

  public Stacking getStacking()

  Specified by:

  getStacking in class PointOptions

  See Also:

  • setStacking(Stacking)

• setStacking

  public void setStacking(Stacking stacking)

  Whether to stack the values of each series on top of each other. Possible values are null to disable, "normal" to stack by value or "percent". When stacking is enabled, data must be sorted in ascending X order.

  Specified by:

  setStacking in class PointOptions

• getStates

  public States getStates()

  Specified by:

  getStates in class PointOptions

  See Also:

  • setStates(States)

• setStates

  public void setStates(States states)

  A wrapper object for all the series options in specific states.

  Specified by:

  setStates in class PointOptions

• getStep

  public StepType getStep()

  See Also:

  • setStep(StepType)

• setStep

  public void setStep(StepType step)

  Whether to apply steps to the line. Possible values are left , center and right. Prior to 2.3.5, only left was supported.

  Defaults to: false

• getStickyTracking

  public Boolean getStickyTracking()

  Specified by:

  getStickyTracking in class PointOptions

  See Also:

  • setStickyTracking(Boolean)

• setStickyTracking

  public void setStickyTracking(Boolean stickyTracking)

  Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series. Defaults to true for line and area type series, but to false for columns, pies etc.

  Defaults to: true

  Specified by:

  setStickyTracking in class PointOptions

• getThreshold

  public Number getThreshold()

  Specified by:

  getThreshold in class PointOptions

  See Also:

  • setThreshold(Number)

• setThreshold

  public void setThreshold(Number threshold)

  The threshold, also called zero level or base level. For line type series this is only used in conjunction with negativeColor.

  Defaults to: 0

  Specified by:

  setThreshold in class PointOptions

• getTooltip

  public SeriesTooltip getTooltip()

  Specified by:

  getTooltip in class PointOptions

  See Also:

  • setTooltip(SeriesTooltip)

• setTooltip

  public void setTooltip(SeriesTooltip tooltip)

  A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip, but only the following properties can be defined on a series level.

  Specified by:

  setTooltip in class PointOptions

• getTurboThreshold

  public Number getTurboThreshold()

  Specified by:

  getTurboThreshold in class PointOptions

  See Also:

  • setTurboThreshold(Number)

• setTurboThreshold

  public void setTurboThreshold(Number turboThreshold)

  When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed. Also, only the first point is tested, and the rest are assumed to be the same format. This saves expensive data checking and indexing in long series. Set it to 0 disable.

  Defaults to: 1000

  Specified by:

  setTurboThreshold in class PointOptions

• getVisible

  public Boolean getVisible()

  Specified by:

  getVisible in class PointOptions

  See Also:

  • setVisible(Boolean)

• setVisible

  public void setVisible(Boolean visible)

  Set the initial visibility of the series.

  Defaults to: true

  Specified by:

  setVisible in class PointOptions

• getZoneAxis

  public ZoneAxis getZoneAxis()

  Specified by:

  getZoneAxis in class PointOptions

  See Also:

  • setZoneAxis(ZoneAxis)

• setZoneAxis

  public void setZoneAxis(ZoneAxis zoneAxis)

  Defines the Axis on which the zones are applied.

  Defaults to: y

  Specified by:

  setZoneAxis in class PointOptions

• getZones

  public Zones[] getZones()

  Specified by:

  getZones in class PointOptions

  See Also:

  • setZones(Zones...)

• setZones

  public void setZones(Zones... zones)

  An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles, according to the zoneAxis option.

  In styled mode, the color zones are styled with the .highcharts-zone-{n} class, or custom classed from the className option (view live demo).

  Specified by:

  setZones in class PointOptions

• addZone

  public void addZone(Zones zone)

  Adds zone to the zones array

  Specified by:

  addZone in class PointOptions

  Parameters:

  zone - to add

  See Also:

  • setZones(Zones...)

• removeZone

  public void removeZone(Zones zone)

  Removes first occurrence of zone in zones array

  Specified by:

  removeZone in class PointOptions

  Parameters:

  zone - to remove

  See Also:

  • setZones(Zones...)

• getCompare

  public Compare getCompare()

  Specified by:

  getCompare in class PointOptions

  See Also:

  • setCompare(Compare)

• setCompare

  public void setCompare(Compare compare)

  Compare the values of the series against the first non-null, non-zero value in the visible range. The y axis will show percentage or absolute change depending on whether compare is set to "percent" or "value". When this is applied to multiple series, it allows comparing the development of the series against each other.

  Defaults to: undefined

  Specified by:

  setCompare in class PointOptions

• getCompareBase

  public Number getCompareBase()

  Specified by:

  getCompareBase in class PointOptions

  See Also:

  • setCompareBase(Number)

• setCompareBase

  public void setCompareBase(Number compareBase)

  When compare is percent, this option dictates whether to use 0 or 100 as the base of comparison.

  Defaults to: 0

  Specified by:

  setCompareBase in class PointOptions

• getDataGrouping

  public DataGrouping getDataGrouping()

  Specified by:

  getDataGrouping in class PointOptions

  See Also:

  • setDataGrouping(DataGrouping)

• setDataGrouping

  public void setDataGrouping(DataGrouping dataGrouping)

  Data grouping is the concept of sampling the data values into larger blocks in order to ease readability and increase performance of the JavaScript charts. Highstock by default applies data grouping when the points become closer than a certain pixel value, determined by the groupPixelWidth option.

  If data grouping is applied, the grouping information of grouped points can be read from the Point.dataGroup.

  Specified by:

  setDataGrouping in class PointOptions

• getGapSize

  public Number getGapSize()

  See Also:

  • setGapSize(Number)

• setGapSize

  public void setGapSize(Number gapSize)

  Defines when to display a gap in the graph. A gap size of 5 means that if the distance between two points is greater than five times that of the two closest points, the graph will be broken.

  In practice, this option is most often used to visualize gaps in time series. In a stock chart, intraday data is available for daytime hours, while gaps will appear in nights and weekends.

  Defaults to: 0

• getGapUnit

  public String getGapUnit()

  Specified by:

  getGapUnit in class PointOptions

  See Also:

  • setGapUnit(String)

• setGapUnit

  public void setGapUnit(String gapUnit)

  Together with gapSize, this option defines where to draw gaps in the graph.

  Defaults to: relative

  Specified by:

  setGapUnit in class PointOptions

• getLegendIndex

  public Number getLegendIndex()

  Specified by:

  getLegendIndex in class PointOptions

  See Also:

  • setLegendIndex(Number)

• setLegendIndex

  public void setLegendIndex(Number legendIndex)

  The sequential index of the series within the legend.

  Defaults to: 0

  Specified by:

  setLegendIndex in class PointOptions

• getNavigatorOptions

  public PlotOptionsSeries getNavigatorOptions()

  Specified by:

  getNavigatorOptions in class PointOptions

  See Also:

  • setNavigatorOptions(PlotOptionsSeries)

• setNavigatorOptions

  public void setNavigatorOptions(PlotOptionsSeries navigatorOptions)

  Options for the corresponding navigator series if showInNavigator is true for this series. Available options are the same as any series, documented at plotOptions and series.

  These options are merged with options in navigator.series, and will take precedence if the same option is defined both places.

  Defaults to: undefined

  Specified by:

  setNavigatorOptions in class PointOptions

• getPointRange

  public Number getPointRange()

  Specified by:

  getPointRange in class PointOptions

  See Also:

  • setPointRange(Number)

• setPointRange

  public void setPointRange(Number pointRange)

  The width of each point on the x axis. For example in a column chart with one value each day, the pointRange would be 1 day (= 24 * 3600 * 1000 milliseconds). This is normally computed automatically, but this option can be used to override the automatic value.

  Defaults to: 0

  Specified by:

  setPointRange in class PointOptions

• getShowInNavigator

  public Boolean getShowInNavigator()

  Specified by:

  getShowInNavigator in class PointOptions

  See Also:

  • setShowInNavigator(Boolean)

• setShowInNavigator

  public void setShowInNavigator(Boolean showInNavigator)

  Whether or not to show the series in the navigator. Takes precedence over navigator.baseSeries if defined.

  Defaults to: undefined

  Specified by:

  setShowInNavigator in class PointOptions

• setPointStart

  @Deprecated public void setPointStart(Date date)

  Deprecated.

  as of 4.0. Use setPointStart(Instant)

  Specified by:

  setPointStart in class PointOptions

  See Also:

  • PointOptions.setPointStart(Number)

• setPointStart

  public void setPointStart(Instant instant)

  Specified by:

  setPointStart in class PointOptions

  See Also:

  • setPointStart(Number)