Method Details

• getChartType

  public abstract ChartType getChartType()

  Overrides:

  getChartType in class AbstractPlotOptions

• getAllowPointSelect

  public abstract Boolean getAllowPointSelect()

  See Also:

  • setAllowPointSelect(Boolean)

• setAllowPointSelect

  public abstract void setAllowPointSelect(Boolean allowPointSelect)

  Allow this series' points to be selected by clicking on the markers, bars or pie slices.

• getAnimation

  public abstract Boolean getAnimation()

  See Also:

  • setAnimation(Boolean)

• setAnimation

  public abstract void setAnimation(Boolean animation)

  Enable or disable the initial animation when a series is displayed. The animation can also be set as a configuration object. Please note that this option only applies to the initial animation of the series itself.

  Due to poor performance, animation is disabled in old IE browsers for column charts and polar charts.

• getAnimationLimit

  public abstract Number getAnimationLimit()

  See Also:

  • setAnimationLimit(Number)

• setAnimationLimit

  public abstract void setAnimationLimit(Number animationLimit)

  For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally.

• getClassName

  public abstract String getClassName()

  See Also:

  • setClassName(String)

• setClassName

  public abstract void setClassName(String className)

  A class name to apply to the series' graphical elements.

• getClip

  public abstract Boolean getClip()

  See Also:

  • setClip(Boolean)

• setClip

  public abstract void setClip(Boolean clip)

  Disable this option to allow series rendering in the whole plotting area.

• getColorIndex

  public abstract Number getColorIndex()

  See Also:

  • setColorIndex(Number)

• setColorIndex

  public abstract void setColorIndex(Number colorIndex)

  A specific color index to use for the series, so its graphic representations are given the class name highcharts-color-{n}.

• getColorKey

  public abstract String getColorKey()

  See Also:

  • setColorKey(String)

• setColorKey

  public abstract void setColorKey(String colorKey)

  Determines what data value should be used to calculate point color if colorAxis is used. Requires to set min and max if some custom point property is used or if approximation for data grouping is set to 'sum'.

• getConnectNulls

  public abstract Boolean getConnectNulls()

  See Also:

  • setConnectNulls(Boolean)

• setConnectNulls

  public abstract void setConnectNulls(Boolean connectNulls)

  Whether to connect a graph line across null points.

• getCrisp

  public abstract Boolean getCrisp()

  See Also:

  • setCrisp(Boolean)

• setCrisp

  public abstract void setCrisp(Boolean crisp)

  When true, each point or column edge is rounded to its nearest pixel in order to render sharp on screen. In some cases, when there are a lot of densely packed columns, this leads to visible difference in column widths or distance between columns. In these cases, setting crisp to false may look better, even though each column is rendered blurry.

• getCropThreshold

  public abstract Number getCropThreshold()

  See Also:

  • setCropThreshold(Number)

• setCropThreshold

  public abstract void setCropThreshold(Number cropThreshold)

  When the series contains less points than the crop threshold, all points are drawn, even if the points fall outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and columns), is that animation is performed on updates. On the other hand, when the series contains more points than the crop threshold, the series data is cropped to only contain points that fall within the plot area. The advantage of cropping away invisible points is to increase performance on large series. .

• getCursor

  public abstract Cursor getCursor()

  See Also:

  • setCursor(Cursor)

• setCursor

  public abstract void setCursor(Cursor cursor)

  You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

• getDescription

  public abstract String getDescription()

  See Also:

  • setDescription(String)

• setDescription

  public abstract void setDescription(String description)

  A description of the series to add to the screen reader information about the series.

• getDashStyle

  public abstract DashStyle getDashStyle()

  See Also:

  • setDashStyle(DashStyle)

• setDashStyle

  public abstract void setDashStyle(DashStyle dashStyle)

  A name for the dash style to use for the graph. Applies only to series type having a graph, like line, spline, area and scatter in case it has a lineWidth. The value for the dashStyle include:

  • Solid
  • ShortDash
  • ShortDot
  • ShortDashDot
  • ShortDashDotDot
  • Dot
  • Dash
  • LongDash
  • DashDot
  • LongDashDot
  • LongDashDotDot

• getEnableMouseTracking

  public abstract Boolean getEnableMouseTracking()

  See Also:

  • setEnableMouseTracking(Boolean)

• setEnableMouseTracking

  public abstract void setEnableMouseTracking(Boolean enableMouseTracking)

  Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.

• getExposeElementToA11y

  public abstract Boolean getExposeElementToA11y()

  See Also:

  • setExposeElementToA11y(Boolean)

• setExposeElementToA11y

  public abstract void setExposeElementToA11y(Boolean exposeElementToA11y)

  By default, series are exposed to screen readers as regions. By enabling this option, the series element itself will be exposed in the same way as the data points. This is useful if the series is not used as a grouping entity in the chart, but you still want to attach a description to the series.

• getFillColor

  public abstract Color getFillColor()

  See Also:

  • setFillColor(Color)

• setFillColor

  public abstract void setFillColor(Color fillColor)

  Fill color or gradient for the area. When null, the series' color is used with the series' fillOpacity.

• getFillOpacity

  public abstract Number getFillOpacity()

  See Also:

  • setFillOpacity(Number)

• setFillOpacity

  public abstract void setFillOpacity(Number fillOpacity)

  Fill opacity for the area. Note that when you set an explicit fillColor, the fillOpacity is not applied. Instead, you should define the opacity in the fillColor with an rgba color definition.

• getFindNearestPointBy

  public abstract Dimension getFindNearestPointBy()

  See Also:

  • setFindNearestPointBy(Dimension)

• setFindNearestPointBy

  public abstract void setFindNearestPointBy(Dimension findNearestPointBy)

  Determines whether the series should look for the nearest point in both dimensions or just the x-dimension when hovering the series. Defaults to 'xy' for scatter series and 'x' for most other series. If the data has duplicate x-values, it is recommended to set this to 'xy' to allow hovering over all points.

  Applies only to series types using nearest neighbor search (not direct hover) for tooltip.

• getGetExtremesFromAll

  public abstract Boolean getGetExtremesFromAll()

  See Also:

  • setGetExtremesFromAll(Boolean)

• setGetExtremesFromAll

  public abstract void setGetExtremesFromAll(Boolean getExtremesFromAll)

  Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.

• getKeys

  public abstract String[] getKeys()

  See Also:

  • setKeys(String...)

• setKeys

  public abstract void setKeys(String... keys)

  An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.

• addKey

  public abstract void addKey(String key)

  Adds key to the keys array

  Parameters:

  key - to add

  See Also:

  • setKeys(String...)

• removeKey

  public abstract void removeKey(String key)

  Removes first occurrence of key in keys array

  Parameters:

  key - to remove

  See Also:

  • setKeys(String...)

• getLineColor

  public abstract Color getLineColor()

  See Also:

  • setLineColor(Color)

• setLineColor

  public abstract void setLineColor(Color lineColor)

  A separate color for the graph line. By default the line takes the color of the series, but the lineColor setting allows setting a separate color for the line without altering the fillColor.

• getLineWidth

  public abstract Number getLineWidth()

  See Also:

  • setLineWidth(Number)

• setLineWidth

  public abstract void setLineWidth(Number lineWidth)

  Pixel with of the graph line.

• getLinecap

  public abstract String getLinecap()

  See Also:

  • setLinecap(String)

• setLinecap

  public abstract void setLinecap(String linecap)

  The line cap used for line ends and line joins on the graph.

• getLinkedTo

  public abstract String getLinkedTo()

  See Also:

  • setLinkedTo(String)

• setLinkedTo

  public abstract void setLinkedTo(String linkedTo)

  The ID of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.

• getNegativeColor

  public abstract Color getNegativeColor()

  See Also:

  • setNegativeColor(Color)

• setNegativeColor

  public abstract void setNegativeColor(Color negativeColor)

  The color for the parts of the graph or points that are below the threshold.

• getNegativeFillColor

  public abstract Color getNegativeFillColor()

  See Also:

  • setNegativeFillColor(Color)

• setNegativeFillColor

  public abstract void setNegativeFillColor(Color negativeFillColor)

  A separate color for the negative part of the area.

• getOpacity

  public abstract Number getOpacity()

  See Also:

  • setOpacity(Number)

• setOpacity

  public abstract void setOpacity(Number opacity)

  Opacity of a series parts: line, fill (e.g. area) and dataLabels.

• getPointDescriptionFormatter

  public abstract String getPointDescriptionFormatter()

• setPointDescriptionFormatter

  public abstract void setPointDescriptionFormatter(String _fn_pointDescriptionFormatter)

• getPointInterval

  public abstract Number getPointInterval()

  See Also:

  • setPointInterval(Number)

• setPointInterval

  public abstract void setPointInterval(Number pointInterval)

  If no x values are given for the points in a series, pointInterval defines the interval of the x values. For example, if a series contains one value every decade starting from year 0, set pointInterval to 10.

  It can be combined with pointIntervalUnit to draw irregular intervals.

• getPointIntervalUnit

  public abstract IntervalUnit getPointIntervalUnit()

  See Also:

  • setPointIntervalUnit(IntervalUnit)

• setPointIntervalUnit

  public abstract void setPointIntervalUnit(IntervalUnit pointIntervalUnit)

  On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year. A day is usually the same as 24 hours, but pointIntervalUnit also takes the DST crossover into consideration when dealing with local time. Combine this option with pointInterval to draw weeks, quarters, 6 months, 10 years etc.

• getPointPlacement

  public abstract PointPlacement getPointPlacement()

  See Also:

  • setPointPlacement(PointPlacement)

• setPointPlacement

  public abstract void setPointPlacement(PointPlacement pointPlacement)

  Possible values: null, "on", "between".

  In a column chart, when pointPlacement is "on", the point will not create any padding of the X axis. In a polar column chart this means that the first column points directly north. If the pointPlacement is "between", the columns will be laid out between ticks. This is useful for example for visualising an amount between two points in time or in a certain sector of a polar chart.

  Note that pointPlacement needs a pointRange to work. For column series this is computed, but for line-type series it needs to be set.

• getPointStart

  public abstract Number getPointStart()

  See Also:

  • setPointStart(Number)

• setPointStart

  public abstract void setPointStart(Number pointStart)

  If no x values are given for the points in a series, pointStart defines on what value to start. For example, if a series contains one yearly value starting from 1945, set pointStart to 1945.

• getSelected

  public abstract Boolean getSelected()

  See Also:

  • setSelected(Boolean)

• setSelected

  public abstract void setSelected(Boolean selected)

  Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.

• getShadow

  public abstract Boolean getShadow()

  See Also:

  • setShadow(Boolean)

• setShadow

  public abstract void setShadow(Boolean shadow)

  Whether to apply a drop shadow to the graph line.

• getShowCheckbox

  public abstract Boolean getShowCheckbox()

  See Also:

  • setShowCheckbox(Boolean)

• setShowCheckbox

  public abstract void setShowCheckbox(Boolean showCheckbox)

  If true, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox is determined by the selected option.

• getShowInLegend

  public abstract Boolean getShowInLegend()

  See Also:

  • setShowInLegend(Boolean)

• setShowInLegend

  public abstract void setShowInLegend(Boolean showInLegend)

  Whether to display this particular series or series type in the legend. The default value is true for standalone series, false for linked series.

• getShowInNavigator

  public abstract Boolean getShowInNavigator()

  See Also:

  • setShowInNavigator(Boolean)

• setShowInNavigator

  public abstract void setShowInNavigator(Boolean showInNavigator)

  Whether or not to show the series in the navigator.

• getStacking

  public abstract Stacking getStacking()

  See Also:

  • setStacking(Stacking)

• setStacking

  public abstract void setStacking(Stacking stacking)

  Whether to stack the values of each series on top of each other. Possible values are null to disable, "normal" to stack by value or "percent".

• getSkipKeyboardNavigation

  public abstract Boolean getSkipKeyboardNavigation()

  See Also:

  • setSkipKeyboardNavigation(Boolean)

• setSkipKeyboardNavigation

  public abstract void setSkipKeyboardNavigation(Boolean skipKeyboardNavigation)

  Whether or not to skip past the points in this series for keyboard navigation.

• getStates

  public abstract States getStates()

  See Also:

  • setStates(States)

• setStates

  public abstract void setStates(States states)

  A wrapper object for all the series options in specific states.

• getStickyTracking

  public abstract Boolean getStickyTracking()

  See Also:

  • setStickyTracking(Boolean)

• setStickyTracking

  public abstract void setStickyTracking(Boolean stickyTracking)

  Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series.

• getTooltip

  public abstract SeriesTooltip getTooltip()

  See Also:

  • setTooltip(SeriesTooltip)

• setTooltip

  public abstract void setTooltip(SeriesTooltip tooltip)

  A configuration object for the tooltip rendering of each single series.

• getTrackByArea

  public abstract Boolean getTrackByArea()

  See Also:

  • setTrackByArea(Boolean)

• setTrackByArea

  public abstract void setTrackByArea(Boolean trackByArea)

  Whether the whole area or just the line should respond to mouseover tooltips and other mouse or touch events.

• getTurboThreshold

  public abstract Number getTurboThreshold()

  See Also:

  • setTurboThreshold(Number)

• setTurboThreshold

  public abstract void setTurboThreshold(Number turboThreshold)

  When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed. Also, only the first point is tested, and the rest are assumed to be the same format. This saves expensive data checking and indexing in long series. Set it to 0 disable.

• getVisible

  public abstract Boolean getVisible()

  See Also:

  • setVisible(Boolean)

• setVisible

  public abstract void setVisible(Boolean visible)

  Set the initial visibility of the series.

• getZoneAxis

  public abstract ZoneAxis getZoneAxis()

  See Also:

  • setZoneAxis(ZoneAxis)

• setZoneAxis

  public abstract void setZoneAxis(ZoneAxis zoneAxis)

  Defines the Axis on which the zones are applied.

• getZones

  public abstract Zones[] getZones()

  See Also:

  • setZones(Zones...)

• setZones

  public abstract void setZones(Zones... zones)

  An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles, according to the zoneAxis option.

• addZone

  public abstract void addZone(Zones zone)

  Adds zone to the zones array

  Parameters:

  zone - to add

  See Also:

  • setZones(Zones...)

• removeZone

  public abstract void removeZone(Zones zone)

  Removes first occurrence of zone in zones array

  Parameters:

  zone - to remove

  See Also:

  • setZones(Zones...)

• getCompare

  public abstract Compare getCompare()

  See Also:

  • setCompare(Compare)

• setCompare

  public abstract void setCompare(Compare compare)

  Compare the values of the series against the first non-null, non-zero value in the visible range. The y axis will show percentage or absolute change depending on whether compare is set to "percent" or "value". When this is applied to multiple series, it allows comparing the development of the series against each other.

• getCompareBase

  public abstract Number getCompareBase()

  See Also:

  • setCompareBase(Number)

• setCompareBase

  public abstract void setCompareBase(Number compareBase)

  This option dictates whether to use 0 or 100 as the base of comparison.

• getDataGrouping

  public abstract DataGrouping getDataGrouping()

  See Also:

  • setDataGrouping(DataGrouping)

• setDataGrouping

  public abstract void setDataGrouping(DataGrouping dataGrouping)

  Data grouping is the concept of sampling the data values into larger blocks in order to ease readability and increase performance of the charts.

• getGapSize

  public abstract Number getGapSize()

  See Also:

  • setGapSize(Number)

• setGapSize

  public abstract void setGapSize(Number gapSize)

  Defines when to display a gap in the graph. A gap size of 5 means that if the distance between two points is greater than five times that of the two closest points, the graph will be broken.

  In practice, this option is most often used to visualize gaps in time series. In a stock chart, intraday data is available for daytime hours, while gaps will appear in nights and weekends.

• getGapUnit

  public abstract String getGapUnit()

  See Also:

  • setGapUnit(String)

• setGapUnit

  public abstract void setGapUnit(String gapUnit)

  Together with gapSize, this option defines where to draw gaps in the graph.

• getLegendIndex

  public abstract Number getLegendIndex()

  See Also:

  • setLegendIndex(Number)

• setLegendIndex

  public abstract void setLegendIndex(Number legendIndex)

  The sequential index of the series within the legend.

• getNavigatorOptions

  public abstract PlotOptionsSeries getNavigatorOptions()

  See Also:

  • setNavigatorOptions(PlotOptionsSeries)

• setNavigatorOptions

  public abstract void setNavigatorOptions(PlotOptionsSeries navigatorOptions)

  Options for the corresponding navigator series if showInNavigator is true for this series.

• getPointRange

  public abstract Number getPointRange()

  See Also:

  • setPointRange(Number)

• setPointRange

  public abstract void setPointRange(Number pointRange)

  The width of each point on the x axis. For example in a column chart with one value each day, the pointRange would be 1 day (= 24 * 3600 * 1000 milliseconds). This is normally computed automatically, but this option can be used to override the automatic value.

• setPointStart

  @Deprecated public abstract void setPointStart(Date date)

  Deprecated.

  as of 4.0. Use setPointStart(Instant)

• setPointStart

  public abstract void setPointStart(Instant instant)

  See Also:

  • setPointStart(Number)