Method Details

• getChartType

  public ChartType getChartType()

  Overrides:

  getChartType in class AbstractPlotOptions

• getAllowPointSelect

  public Boolean getAllowPointSelect()

  See Also:

  • setAllowPointSelect(Boolean)

• setAllowPointSelect

  public void setAllowPointSelect(Boolean allowPointSelect)

  Allow this series' points to be selected by clicking on the markers, bars or pie slices.

  Defaults to: false

• getAnimation

  public Boolean getAnimation()

  See Also:

  • setAnimation(Boolean)

• setAnimation

  public void setAnimation(Boolean animation)

  Enable or disable the initial animation when a series is displayed. Please note that this option only applies to the initial animation of the series itself. For other animations, see ChartModel.setAnimation(Boolean)

• getAnimationLimit

  public Number getAnimationLimit()

  See Also:

  • setAnimationLimit(Number)

• setAnimationLimit

  public void setAnimationLimit(Number animationLimit)

  For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally. To disable this cap, set animationLimit to Infinity.

• getBorderColor

  public Color getBorderColor()

  See Also:

  • setBorderColor(Color)

• setBorderColor

  public void setBorderColor(Color borderColor)

  The color of the border surrounding each slice. When null, the border takes the same color as the slice fill. This can be used together with a borderWidth to fill drawing gaps created by antialiazing artefacts in borderless pies.

  In styled mode, the border stroke is given in the .highcharts-point class.

  Defaults to: #ffffff

• getBorderWidth

  public Number getBorderWidth()

  See Also:

  • setBorderWidth(Number)

• setBorderWidth

  public void setBorderWidth(Number borderWidth)

  The width of the border surrounding each slice.

  When setting the border width to 0, there may be small gaps between the slices due to SVG antialiasing artefacts. To work around this, keep the border width at 0.5 or 1, but set the borderColor to null instead.

  In styled mode, the border stroke width is given in the .highcharts-point class.

  Defaults to: 1

• setCenter

  public void setCenter(String[] center)

  The center of the pie chart relative to the plot area. Can be percentages or pixel values. The default behaviour (as of 3.0) is to center the pie so that all slices and data labels are within the plot area. As a consequence, the pie may actually jump around in a chart with dynamic values, as the data labels move. In that case, the center should be explicitly set, for example to ["50%", "50%"].

  Defaults to: [null, null]

• getClassName

  public String getClassName()

  See Also:

  • setClassName(String)

• setClassName

  public void setClassName(String className)

  A class name to apply to the series' graphical elements.

• getClip

  public Boolean getClip()

  See Also:

  • setClip(Boolean)

• setClip

  public void setClip(Boolean clip)

  Disable this option to allow series rendering in the whole plotting area. Note that clipping should be always enabled when chart.zoomType is set

  Defaults to false.

  Parameters:

  clip -

• getColorIndex

  public Number getColorIndex()

  See Also:

  • setColorIndex(Number)

• setColorIndex

  public void setColorIndex(Number colorIndex)

  Styled mode only. A specific color index to use for the series, so its graphic representations are given the class name highcharts-color-{n}.

• getColorKey

  public String getColorKey()

  See Also:

  • setColorKey(String)

• setColorKey

  public void setColorKey(String colorKey)

  Determines what data value should be used to calculate point color if colorAxis is used. Requires to set min and max if some custom point property is used or if approximation for data grouping is set to 'sum'.

  Defaults to y.

  Parameters:

  colorKey -

• getColors

  public Color[] getColors()

  See Also:

  • setColors(Color...)

• setColors

  public void setColors(Color... colors)

  A series specific or series type specific color set to use instead of the global colors.

• addColor

  public void addColor(Color color)

  Adds color to the colors array

  Parameters:

  color - to add

  See Also:

  • setColors(Color...)

• removeColor

  public void removeColor(Color color)

  Removes first occurrence of color in colors array

  Parameters:

  color - to remove

  See Also:

  • setColors(Color...)

• getCrisp

  public Boolean getCrisp()

  See Also:

  • setCrisp(Boolean)

• setCrisp

  public void setCrisp(Boolean crisp)

  When true, each point or column edge is rounded to its nearest pixel in order to render sharp on screen. In some cases, when there are a lot of densely packed columns, this leads to visible difference in column widths or distance between columns. In these cases, setting crisp to false may look better, even though each column is rendered blurry.

  Defaults to true.

• getCursor

  public Cursor getCursor()

  See Also:

  • setCursor(Cursor)

• setCursor

  public void setCursor(Cursor cursor)

  You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

• getDataLabels

  public DataLabels getDataLabels()

  See Also:

  • setDataLabels(DataLabels)

• setDataLabels

  public void setDataLabels(DataLabels dataLabels)

• getDepth

  public Number getDepth()

  See Also:

  • setDepth(Number)

• setDepth

  public void setDepth(Number depth)

  The thickness of a 3D pie. Requires highcharts-3d.js

  Defaults to: 0

• getDescription

  public String getDescription()

  See Also:

  • setDescription(String)

• setDescription

  public void setDescription(String description)

  Requires Accessibility module

  A description of the series to add to the screen reader information about the series.

  Defaults to: undefined

• getEnableMouseTracking

  public Boolean getEnableMouseTracking()

  See Also:

  • setEnableMouseTracking(Boolean)

• setEnableMouseTracking

  public void setEnableMouseTracking(Boolean enableMouseTracking)

  Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.

  Defaults to: true

• getEndAngle

  public Number getEndAngle()

  See Also:

  • setEndAngle(Number)

• setEndAngle

  public void setEndAngle(Number endAngle)

  The end angle of the pie in degrees where 0 is top and 90 is right. Defaults to startAngle plus 360.

  Defaults to: null

• getExposeElementToA11y

  public Boolean getExposeElementToA11y()

  See Also:

  • setExposeElementToA11y(Boolean)

• setExposeElementToA11y

  public void setExposeElementToA11y(Boolean exposeElementToA11y)

  By default, series are exposed to screen readers as regions. By enabling this option, the series element itself will be exposed in the same way as the data points. This is useful if the series is not used as a grouping entity in the chart, but you still want to attach a description to the series.

  Requires the Accessibility module.

  Defaults to: undefined

• getFindNearestPointBy

  public Dimension getFindNearestPointBy()

  See Also:

  • setFindNearestPointBy(Dimension)

• setFindNearestPointBy

  public void setFindNearestPointBy(Dimension findNearestPointBy)

  Determines whether the series should look for the nearest point in both dimensions or just the x-dimension when hovering the series. Defaults to 'xy' for scatter series and 'x' for most other series. If the data has duplicate x-values, it is recommended to set this to 'xy' to allow hovering over all points.

  Applies only to series types using nearest neighbor search (not direct hover) for tooltip.

• getGetExtremesFromAll

  public Boolean getGetExtremesFromAll()

  See Also:

  • setGetExtremesFromAll(Boolean)

• setGetExtremesFromAll

  public void setGetExtremesFromAll(Boolean getExtremesFromAll)

  Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.

  Defaults to: false

• getIgnoreHiddenPoint

  public Boolean getIgnoreHiddenPoint()

  See Also:

  • setIgnoreHiddenPoint(Boolean)

• setIgnoreHiddenPoint

  public void setIgnoreHiddenPoint(Boolean ignoreHiddenPoint)

  Equivalent to chart.ignoreHiddenSeries, this option tells whether the series shall be redrawn as if the hidden point were null.

  The default value changed from false to true with Highcharts 3.0.

  Defaults to: true

• getInnerSize

  public String getInnerSize()

  See Also:

  • setInnerSize(String)

• setInnerSize

  public void setInnerSize(String innerSize)

  The size of the inner diameter for the pie. A size greater than 0 renders a donut chart. Can be a percentage or pixel value. Percentages are relative to the pie size. Pixel values are given as integers.

  Note: in Highcharts < 4.1.2, the percentage was relative to the plot area, not the pie size.

  Defaults to: 0

• getKeys

  public String[] getKeys()

  See Also:

  • setKeys(String...)

• setKeys

  public void setKeys(String... keys)

  An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.

• addKey

  public void addKey(String key)

  Adds key to the keys array

  Parameters:

  key - to add

  See Also:

  • setKeys(String...)

• removeKey

  public void removeKey(String key)

  Removes first occurrence of key in keys array

  Parameters:

  key - to remove

  See Also:

  • setKeys(String...)

• getLinkedTo

  public String getLinkedTo()

  See Also:

  • setLinkedTo(String)

• setLinkedTo

  public void setLinkedTo(String linkedTo)

  The id of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.

• getMinSize

  public Number getMinSize()

  See Also:

  • setMinSize(Number)

• setMinSize

  public void setMinSize(Number minSize)

  The minimum size for a pie in response to auto margins. The pie will try to shrink to make room for data labels in side the plot area, but only to this size.

  Defaults to: 80

• getOpacity

  public Number getOpacity()

  See Also:

  • setOpacity(Number)

• setOpacity

  public void setOpacity(Number opacity)

  Opacity of a series parts: line, fill (e.g. area) and dataLabels.

  Defaults to 1.

• getPointDescriptionFormatter

  public String getPointDescriptionFormatter()

• setPointDescriptionFormatter

  public void setPointDescriptionFormatter(String _fn_pointDescriptionFormatter)

• getSelected

  public Boolean getSelected()

  See Also:

  • setSelected(Boolean)

• setSelected

  public void setSelected(Boolean selected)

  Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.

  Defaults to: false

• getShadow

  public Boolean getShadow()

  See Also:

  • setShadow(Boolean)

• setShadow

  public void setShadow(Boolean shadow)

  Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.

  Defaults to: false

• getShowInLegend

  public Boolean getShowInLegend()

  See Also:

  • setShowInLegend(Boolean)

• setShowInLegend

  public void setShowInLegend(Boolean showInLegend)

  Whether to display this particular series or series type in the legend. Since 2.1, pies are not shown in the legend by default.

  Defaults to: false

• getSize

  public String getSize()

  See Also:

  • setSize(String)

• setSize

  public void setSize(String size)

  The diameter of the pie relative to the plot area. Can be a percentage or pixel value. Pixel values are given as integers. The default behaviour (as of 3.0) is to scale to the plot area and give room for data labels within the plot area. As a consequence, the size of the pie may vary when points are updated and data labels more around. In that case it is best to set a fixed value, for example "75%".

  Defaults to:

• getSkipKeyboardNavigation

  public Boolean getSkipKeyboardNavigation()

  See Also:

  • setSkipKeyboardNavigation(Boolean)

• setSkipKeyboardNavigation

  public void setSkipKeyboardNavigation(Boolean skipKeyboardNavigation)

  If set to True, the accessibility module will skip past the points in this series for keyboard navigation.

• getSlicedOffset

  public Number getSlicedOffset()

  See Also:

  • setSlicedOffset(Number)

• setSlicedOffset

  public void setSlicedOffset(Number slicedOffset)

  If a point is sliced, moved out from the center, how many pixels should it be moved?.

  Defaults to: 10

• getStartAngle

  public Number getStartAngle()

  See Also:

  • setStartAngle(Number)

• setStartAngle

  public void setStartAngle(Number startAngle)

  The start angle of the pie slices in degrees where 0 is top and 90 right.

  Defaults to: 0

• getStates

  public States getStates()

  See Also:

  • setStates(States)

• setStates

  public void setStates(States states)

  A wrapper object for all the series options in specific states.

• getStickyTracking

  public Boolean getStickyTracking()

  See Also:

  • setStickyTracking(Boolean)

• setStickyTracking

  public void setStickyTracking(Boolean stickyTracking)

  Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series.

  Defaults to: false

• getTooltip

  public SeriesTooltip getTooltip()

  See Also:

  • setTooltip(SeriesTooltip)

• setTooltip

  public void setTooltip(SeriesTooltip tooltip)

  A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip, but only the following properties can be defined on a series level.

• getVisible

  public Boolean getVisible()

  See Also:

  • setVisible(Boolean)

• setVisible

  public void setVisible(Boolean visible)

  Set the initial visibility of the series.

  Defaults to: true

• getZoneAxis

  public ZoneAxis getZoneAxis()

  See Also:

  • setZoneAxis(ZoneAxis)

• setZoneAxis

  public void setZoneAxis(ZoneAxis zoneAxis)

  Defines the Axis on which the zones are applied.

  Defaults to: y

• getZones

  public Zones[] getZones()

  See Also:

  • setZones(Zones...)

• setZones

  public void setZones(Zones... zones)

  An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles, according to the zoneAxis option.

  In styled mode, the color zones are styled with the .highcharts-zone-{n} class, or custom classed from the className option (view live demo).

• addZone

  public void addZone(Zones zone)

  Adds zone to the zones array

  Parameters:

  zone - to add

  See Also:

  • setZones(Zones...)

• removeZone

  public void removeZone(Zones zone)

  Removes first occurrence of zone in zones array

  Parameters:

  zone - to remove

  See Also:

  • setZones(Zones...)

• setCenter

  public void setCenter(String x, String y)

• getCenter

  public String[] getCenter()